"

ued西甲赫塔菲-官网拥有全球最顶尖的原生APP,每天为您提供千场精彩体育赛事,ued西甲赫塔菲-官网更有真人、彩票、电子老虎机、真人电子竞技游戏等多种娱乐方式选择,ued西甲赫塔菲-官网让您尽享娱乐、赛事投注等,且无后顾之忧!

  • "
    Change language: cn en   ح Technique
      Home Products Company Downloads Contact News  
    Home Products Temperature Measurement Temperature Assemblies    
    Temperature Measurement - Temperature Assemblies
    Temperature Assemblies

    For a measuring insert with a Pt100 resistance sensor, the temperature-sensitive sensor element is made from platinum RTD whose value at 0/ +32F is 100 . The electrical resistance of metals increases according to a mathematical function as the temperature rises.

    This effect is used with resistance thermometers to measure the temperature: a constant current I flows through the Pt100 RTD, creating a voltage drop U. The resistance R follows Ohms Law: R = U / I and corresponds to a specific temperature. The temperature dependency is repeatable and is standardised in a characteristic curve.

    Very simply put, think of the thermocouple as a battery whose voltage increases with the temperature. The temperature, dependent on the thermovoltage, is standardised and can thus be precisely determined

    Industries
    Chemical
    Petrochemical
    Oil and gas
    Energy supply
    Machine building
    Pharmaceutical
    Food and beverage
    Water and wastewater
    Iron and steel
    Pulp and paper
     
     
     
    Industrial Temperature Assemblies
    The OPTITEMP temperature assembly is available with or without thermowell, usually attached with a compression fitting. It's an all-purpose device since the decision as to the required insertion depth is only necessary immediately prior to installation.
    Temperature range from -200C to 600C, depending on the load
    Different heads available, IP54 to IP68
    Optional head mounted transmitter & display
    Spring loaded mineral isolated RTD or TC insert
    Inserts sheath material 316 L or Inconel 600
    High Temperature Assemblies
    The OPTITEMP TCA-P60 is an insertion thermocouple with steel thermowell, equipped with base-metal thermocouple only, e.g. with mineral-insulated measuring insert TC100 element types J and K.
    Temperature range with type J up to 750C
    Temperature range with type K up to 1150C
    Different heads available
    Optional with head mounted transmitter or transmitter in field housing
    Spring loaded, MI-measuring insert with thermocouple, single or double
    Measuring inserts sheath material 2.4816 / Inconel 600
    Standard and customised insertion length
    Hygienic Temperature Assemblies
    Hygienic thermometers are manufactured with stainless steel thermowells or an outer sheath and provided with various process connections. Thermometers with an outer sheath diameter of 6 mm do not provide a replaceable measuring insert.
    Dead space free construction
    Standard surface finish of wetted parts surface roughness of 0,5 m
    Welded, multi part thermowell
    Standard connection heads or stainless steel versions
    Transmitter mounted in head or in field housing
    Single or double Pt100 sensor
    Standard and customised insertion lengths
    Temperature Assemblies for Advanced Requirements
    OPTITEMP advanced industrial temperature assemblies feature typically bar stock thermowells made of stainless steel and are designed for high pressure and high flow rates. Weld-in, screw-in and flange variants are manufactured according to DIN- and ANSI - standards.
    Temperature range from -200C to 600C, depending on the load
    Different heads available, IP54 to IP68
    Optional head mounted transmitter & display
    Spring loaded mineral isolated RTD or TC insert
    Stainless steel 316 Ti, 316 L, AISI F12, C22.8
    Standard and customised length
    ued׺-