• "
    Change language: cn en   ح Technique
      Home Products Company Downloads Contact News  
    Home Products Level Measurement Level Transmitters LT 100
    Level Transmitters - LT 100
    Level Transmitters - LT 100
    The LT100 is designed for liquid level measurement in storage or process tanks.The products must not be adhesive or of high viscosity.The min. density is 0.4 kg/l or 25 lb/ft3.Optional:Interface level between two immiscible liquids.The difference in density between both liquids needs to be min. 100g/l.
    Long-distance data transmission up to 2000m
    Simple and rugged design for pressures up to 40 bar/580 psig and temperatures up to 130/266H
    Guide tube length 0.3 - 6 m
    Wetted parts of stainless stell;foraggressive products coated with PVC,PP,PVDF,PTFE
    Interface detection also possible
    Measuring Principle
    A float guided on a non-magnetic tube follows the level of the liquid surface, thereby actuating the reed switches located inside the tube by means of a built-in magnet system. The reed switches shunt over parts of a resistor string. The magnet system operates the reed switches according to the position of the float and thus causes the resistance of the resistor string to change as a function of the liquid level. The float travel distance can be limited by stops fitted to the guide tube. The signal conditioner produces an output signal from 4 C 20 mA.
    LT 100